Building small machines by hand, from sketch to first spin.
Every project is a machine built from scratch: CAD design, 3D printing, hand work, Arduino wiring and test runs. Each one comes with the parts list, wiring diagram and code so you can build it too.

Latest projects
Projects →What each project includes
CAD design
Model renders, key dimensions and how the parts fit together.
Parts list
Components, screws and bearings with the specs to look for.
Wiring
Which pin goes where and what supply voltage to use.
Code
Commented Arduino/ESP32 sketches, ready to upload.
From the workshop
Workshop →
28BYJ-48 stepper + ULN2003 with Arduino: wiring, code and common problems
How to wire the 28BYJ-48 stepper to a ULN2003 board and Arduino, AccelStepper code for continuous speed and fixed angles, and why it buzzes but won't turn.

3D printing tolerances for shafts and bearings: clearance, press fit and test prints
Printed hole sizes for Ø8 and Ø6 shafts, 688 bearings and LM6UU bushings, clearance vs press fit, teardrop holes for horizontal bores and how to print a tolerance test.

Designing 3D-printed gears: module, tooth count, profile shift and backlash
How to choose module, tooth count and ratio for 3D-printed gears, why small pinions need profile shift, how much backlash to leave and print settings for clean teeth.
STL shop coming soon
Print files for the machines in each video will be sold here, with print settings and a parts list. Electronics will link to our Shopee and TikTok Shop stores.
